Mil-Spec buttstock with adjustable MOE DT-PR™ spacing length from Magpul. Compatible with Mil-Spec receiver extensions of the AR family or such as the FTCS No. 25. Made of polymer, it has the added reinforcement of an enclosed design. High rubberized foot, will help reduce the effects of weapon recoil. Wide hole covering the lever for ejection adjustment. Adjustment of the extension of the buttstock is carried out by a lever on a spring, so it securely grips the set position and prevents accidental ejection or retraction. The unique DT Dual Tension system more securely connects the buttstock to the receiver extension, resulting in less potential backlash. The design of the buttstock allows it to use its undercut bottom to rest on shooting pads. The MOE DT-PR™ buttstock is a great point of support when using a weapon with a wide cheek pad. At approximately 300 grams, it remains resistant to use in harsh environments as well as weather conditions. The integrated QD port allows you to attach various suspensions to the weapon. The buttstock sits solidly and tightly on the weapon, and its form allows for more than one way to grip it if necessary. Features: MOE DT-PR™ adjustable buttstock Compatible with Mil-Spec's AR family of receiver extensions DT Dual Tension system for a secure grip between the buttstock and the slide Adjustable buttstock extension length spacing Chrome-plated adjustment lever spring Low weight, high strength Integrated QD port for attaching tactical suspension Made of durable polymer with an undercut underside High rubberized footplate, reduces the recoil effect of the weapon

Mil-Spec buttstock with adjustable MOE PR spacing length from Magpul. Compatible with Mil-Spec buttstock guides of the AR family or such as the FTCS No. 25. Made of polymer, it has additional reinforcement in the form of a rectangular-plan design. High rubberized foot, will help reduce the effects of weapon recoil. A wide hole covering the lever for ejection adjustment. Adjustment of the buttstock's position is carried out by a lever on a spring, so that it securely grips the set position and prevents accidental ejection or retraction. The spring of the lever is made of chrome alloy, which will ensure a secure lock for a long time. The design of the buttstock makes it possible to use its undercut bottom to rest on the shooting pads. The MOE PR buttstock is a reasonable part for a weapon with the possibility of further expansion and the addition of adapters or cheek pads. With a weight of less than 250 grams, it remains resistant to use in harsh conditions of both environment and weather. A rectangular hole allows you to pull the suspension strap to the weapon. The buttstock sits solidly on the weapon, and its form allows for more than one way to grip it if needed. Features: MOE PR adjustable buttstock Compatible with Mil-Spec's AR family of buttstock guides Adjustable buttstock extension length spacing Chrome-plated adjustment lever spring Low weight, high strength Adaptable QD port for attaching tactical suspension Made of durable polymer with additional bar for extra grip High rubberized footplate, reduces the recoil effect of the weapon

Ultraleichter, minimalistischer CTR-Schaft für Mil-Spec Buffer Tubes, hergestellt in den USA von Magpul Industries Corp. Die Verwendung von bewährten, verstärkten Polymeren in Verbindung mit strengen Qualitätskontrollen machen Magpul-Produkte besonders zuverlässig und langlebig. Merkmale - Überdurchschnittliche Haltbarkeit bei geringem Gewicht - Hoher Tragekomfort durch Extended Rubber Butt-Pad - Beidseitig komfortable Wangenprofilierung - Verstellknopf, zusätzlich durch Rahmen geschützt - Chrom-Silizium-Feder - Riemen zur Befestigung von Backenaufsätzen - Der vordere Teil des Schaftes ermöglicht die Verwendung von Magpul ASAP® und ASAP® QD Riemenhaltern. - Ein Loch zum Einfädeln von Paracord und zwei Schlitze hinten und unten ermöglichen die Verwendung von 1,25"-Schlingen.   Technische Daten - Gewicht: 261 g - Länge: 182 mm - Verstellbereich: 96 mm - LOP zusammengeklappt: 274 mm - LOP ausgefahren: 370 mm   HINWEIS: Die Länge kann je nach verwendetem Buffer Tube variieren.

Ultralight, MOE® (Magpul Original Equipment) minimalistic stock adapted for mil-spec buffer tubes, made in the USA by Magpul Industries Corp. The use of proven reinforced polymer together with high quality control rigors makes Magpul products characterized by reliability and longevity. Features: - above-average durability combined with low weight - High comfort thanks to Extended Rubber Butt-Pad - Bilateral comfortable profiling of the cheek - Adjustment button, additionally shielded with the frame - Chrome-silicon spring - Straps for mounting cheek risers - The front part of the stock allows the use of Magpul ASAP® and ASAP® QD sling mounts - Hole for binding the paracord and two slots at the back and bottom allow the use of 1.25" slings Technical data: - weight: 251 g - length: 182 mm - adjustment range: 96 mm - LOP collapsed: 274 mm - LOP extended: 370 mm NOTE: The length may vary depending on the buffer tube used.

Based on proven MOE® (Magpul Original Equipment) design stock, equipped with two battery compartments, intended for mil-spec buffer tubes. The use of proven reinforced polymer together with high quality control rigors makes Magpul products characterized by reliability and longevity. Features: - Mounts on commercial-spec sized carbine receiver extension tube from manufacturers such as Bushmaster, DPMS, Olympic, and others - Two water-resistant battery storage tubes located on the left and right sides of the stock - Each tube will store up to two (2) CR123A lithium or AA batteries - Tubes are accessible from the rear in any stock position via a hand-removable rubber plug - Supplemental friction lock minimizes accuracy robbing wobble - Premium chrome-silicon lock spring provides positive locking and long service life - Sloping cheek weld provides a wide contact surface for user comfort - Shielded release latch prevents snagging and accidental operation - Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection - Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments Technical data: - weight: 358 g - length: 185 mm - width: 66 mm - adjustment range: 83 mm - LOP, collapsed: 277 mm - LOP, extended: 360 mm NOTE: The length may vary depending on the guide used.

The UBR GEN2 is an adjustable stock for AR15/M4 and AR10/SR25 platforms, designed to offer similar strength and stability as a fixed stock with a consistent and comfortable cheek weld in any position. An update of the revolutionary Utility / Battle Rifle (UBR) stock, the UBR GEN2 features a fixed cheek piece to provide a consistent cheek weld in any of its eight positions, and is compatible with Carbine as well as A5 and SR-25 length buffer systems. Designed to accommodate large bore AR calibers and withstand severe impacts, the UBR GEN2 is nearly five ounces lighter while retaining all the durability its predecessor was legendary for. Comes standard with front and rear QD sling attachment points, two footman's loops, the ergonomic MOE SL™ angled-toe rubber butt-pad, and customizable storage compartment. Features: - Equipped with a dedicated Receiver Extension tube, Buffer Spacer, and all mounting hardware - Fits the AR15/M4 and AR10/SR25 - Comb that combines compact dimensions with convenience - Double-sided adjustment lever, lockable in 8 positions - Compact buttpad with a shape that reduces kickback and makes bulletproof vests easier to use - Flap-locked ambidextrous storage compartment, removable - Two QD system mounting slots - Loop for 1.25" suspension. Technical data: - weight: 602 g - length: 216 mm - adjustment range: 89 mm - LOP collapsed: 300 mm - LOP extended: 389 mm